Payment & Shipping Terms:
|Optical Connector:||Duplex/Single LC||Wave Length:||1310nm/1550nm/1330nm|
1 TO 4 USB3.0 fiber splitter,also named as USB3.0 fiber extension hub , which through a two-core or one core fiber to distribute 1CH 5Gb/s USB3.0 high-speed signal to 4CH at the 250 meters away, USB3.0 fiber extension hub using a dedicated USB3.0 PHY to meet the USB3.0 protocol requirements,using SFP+ photoelectric conversion to reach USB3.0 SuperSpeed signal stable transmission. This equipment consist of two parts-the host side (receiver Rx) and the device side (transmitter Tx). The host side uses type A USB3.0 connector for power supply, the device side uses external power supply.
1, industrial video transmission
2, machine vision system
3, high-definition video surveillance system
4, high-speed data acquisition system
5, remote storage
6, digital signage and TV wall
7, industrial printer system
1, USB3.0 SuperSpeed high-speed signal transmission distance extended to 250 meters (single-mode or multi-mode fiber)
2, to meet the USB3.0 signal 5Gbps bandwidth
3, for the USB3.0 equipment to provide power supply
4, support all self-powered USB3.0 device
5, plug and play, no need driver software
6, USB3.0 A type interface
7, dual fiber or single fiber LC optical interface
8, not compatible with USB1.1 and USB2.0Product specification
1,Connect Host-side (receiver Rx) into the USB3.0 interface;
2,Connect Device-side(transmitter Tx) to 12V power adapter;
3,Connect USB3.0 devices to the device-side (transmitter Tx).
Note If the computer does not recognize the equipment, pls do as following,
1,Press the REST button on the device side for 5 seconds to restart the device.
2,Change a USB3.0 interface on the computer to re-connected.
3,Uninstall the "USB3.0 Hub"in the Device Manager,then reconnect it.
Note In the course of the use, do not arbitrarily plug the fiber and USB3.0 cable, it will cause the device does not work properly.