JiaMinAVTech Co., Ltd. is a collection of audio&video fiber optic transmission equipment, systems development, production, sales and service high-tech company. 

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
  • Product Details

Fiber Optic Camera Mount System with Datavideo MCU-100 and ITC-100 for OB VAN system

Verified Supplier

China

Detailed Product Description
Work Temp: -25°C To 55°C Storage Temp: -40°C To 85°C
Wavelength: 1310nm / 1550nm / CWDM Transmission Distance: SM Fiber 10+km , MM Fiber 300m
Optical Connector: Dul LC (optional) Signal Format: SMPTE 424M, SMPTE 292M, SMPTE 259M
Data Rate: 270Mbit/s - 1.48Gbit/s - 3Gbit/s

Datavideo MCU-100 and ITC-100 Fiber Optic Camera Mount System(JM-EFP-G17)consists of camera fiber optic adapter (TX) and fiber optic base station (RX) , custom-designed for long-distance transmission of Panasonic live production system, to transmit a 3G/HD-SDI signal from the camera side to the Base Station, remote control(Datavideo MCU-100 or MCU-200), Intercom(Datavideo ITC-100), Tally(connect to ITC-100), The system puts all of the signals needed for multi-camera 3G/HD-SDI production onto 2xSM fiber with LC interface.

Power supply:

This product is the battery power supply, the camera fiber optic adapter (TX) hanging on the camcorder via the front A shaped gusset plate , the back hanging battery while power supply to the Sony/JVC/Panasonic camera and fiber optic adapter.

Datavideo MCU-100&ITC-100 Fiber Optic Camera Mount System(JM-EFP-G17) Features:

Easily pass the Pathological test(extremely harsh environments)

SD, HD, 3G automatic input detection, support 270Mbit / s - 1.48Gbit / s - 3Gbit / s rate, support SMPTE-424M 3Gbps HD-SDI, SMPTE-292M HD-SDI, SMPTE-259M SDI serial digital video signals and DVB-ASI signals

Uncompressed lossless transmission without delay;

More than 10KM transmission distance up to a maximum 80KM; when the opto-electric hybrid cable power supply the distance up to 250 meters.

Aluminum precision manufacturing, the size is about the BP battery size, lightweight and convenient, A-type with a flexible pinch;

Supports Datavideo MCU-100 or MCU-200

Mic level input (with mute function) and amp functions (volume adjustment)

Tally output +12V or dry Contact Closure optional

Wide temperature range, low power consumption

A-mount battery optional

Application:

Television studio, mobile studio

EFP Electronic Field Production, major sporting events and large celebrations broadcast live

ENG camera (outdoor photo camcorders) upgraded to a EFP camera.

     Remote OB Van/Truck Video Feeds

     Broadcast Studio Camera Feeds

     SD Routing (Requires Optical Matrix Switch)

     Long-Haul Signal Transport  

     Lecture Hall Projector Connectivity

     Medical / Surgical Room Broadcast

Specifications:

General index

Work Temp -25°C to 55°C
Storage Temp -40°C to 85°C
humidity 0 ~ 95% (non-condensing)
Camera Optic Adaptor
Input power DC 12~19V
Power consumption <10W
Net weight 1kg
Appearance size A-Type the size is 160mm*100mm*44mm

Camera optic adaptor image as below:

Fiber Optic Camera Mount System with Datavideo MCU-100 and ITC-100 for OB VAN system

 

Optic Base Station
Input power AC90~240V
Power consumption <10W
Net weight 3kg
Appearance size 19” 1U standard rack mount

Optical:

Wavelength 1310nm / 1550nm / CWDM
Output Power -6~-1dBm
Rx sensitivity <-18dBm
Transmission Distance SM fiber 10+km , MM fiber 300m
Optical connector Dul LC (optional)

SDI input/output:

Signal format SMPTE 424M, SMPTE 292M, SMPTE 259M
Data rate 270Mbit/s - 1.48Gbit/s - 3Gbit/s
Cable Equalization

Automatic cable EQ (Belden 1694A cable)

250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s

SDI interface BNC 75 Ohm
SDI Channel 1CH (camera side to base side)

Intercom:

Camera Optic Adaptor
Interface 3.5mm connector
Microphone Mic inputs with mute and pre-amps
Headphone with volume up or down
Optic Base Station
Interface 5Pin XLR connector Male
Audio Bidi Line level audio connected to Datavideo ITC-100

Tally:

Camera Optic Adaptor
Interface 3.5mm connector
Output Dry Contact Closure

On: short or +12V

Off: open or 0V

Optic Base Station
Interface 5Pin XLR connector(Male)
Input Dry Contact Closure
On: short to GND or TTL low Off: open or TTL high

Remote:

Camera Optic Adaptor
Interface RJ45
Data Support Datavideo MCU-100 or MCU-200
Optic Base Station
Interface RJ45
Data Connected to Datavideo MCU-100 or MCU-200

 

Product Name Fiber Optic Camera Mount System with Datavideo MCU-100 and ITC-100 for OB VAN system
Product Model JM-EFP-G17
SDI Connector BNC
Optical Fiber Dual LC fibers,Compatible with multimode or single mode fiber
Power Supply AC85-260V/50Hz /DC 12V
SDI Format 1)All inputs and outputs are equalized and re-clocked
2)Immune to pathological patterns over the entire link budget and operating temperature range
3)SMPTE 424M-2006, 292, 259 and DVB-ASI compliant
4)Supports embedded audio and data signals
5)Support SDSDI & HDSDI & 3GSDI, Support 270M & 1.485G & 2.97G SDI Video
Dimension TX: A-Lock on camera end, RX: 19" 1U rack mount on base end
Working Environment Working Temperature: 0 ℃~+85 ℃; Relative Humidity: 0 ~ 95% (no cold condensation)
Warranty 2 Years warranty
Product description Compliance: 3G, HD, SD compliance, SMPTE 424M, SMPTE 292M, SMPTE 259M
1 x 3G-HDSDI, forward direction (from tx)
1x intercom( microphone audio and headphone in from TX,line level audio out,support Datavideo ITC-100),
1xRemote control(Datavideo MCU-100 or MCU-200)
1 x Tally (dry contact closure,connect to Datavideo ITC-100)
Rx Dimension: 480 x 250 x 50 (mm) = 19' standard case
Grosse weight is about 6.5kg,
Extends distance: Single mode 10km / Multi mode 300 meters
Packing in box: Transmitter x1, Receiver x 1, Power wire x 1, Use mannual x 1

 

 

Transmitter ( Camera fiber adaptor ) Receiver ( Base end )
Shape: A-lock Shape: 1U Rack mount
Video: 1x 3G-HDSDI input, 1x 3G-HDSDI Loopout, BNC connector Video: 2x 3G-HDSDI output, BNC connector
Intercom: 1x 3.5mm connector,Mic inputs with mute and pre-amps,headphone with volume up or down Intercom: 1x5Pin XLR connector, Male,line level audio,support Datavideo ITC-100
Tally: 1x 3.5mm Connector,Dry contact closure, Tally:1x5Pin XLR Male Connector connect to Datavideo ITC-100, Dry contact closure,
Remote: RJ45 connector,Support Datavideo MCU-100 or MCU-200 Remote: RJ45 connector,Connect to Datavideo MCU-100 or MCU-200
Vol Control: Mute, Vol+, Vol-,  
Fiber : 2xLC Fiber : 2xLC
Power supply: DC12V input Power supply for base end: 1x AC 90-240V,
LED indicator: SDI in, SDI loopout, PWR,Mic,Fiber LED indicator:SDI out,Fiber,PWR

 

Panel diagram:

Fiber Optic Camera Mount System with Datavideo MCU-100 and ITC-100 for OB VAN system

Fiber Optic Camera Mount System with Datavideo MCU-100 and ITC-100 for OB VAN system

 

Contact Details
JiaMinAVTech Co., Ltd

Contact Person: Mr. Smug

Tel: 86-139-8608-1404

Send your inquiry directly to us (0 / 3000)